configure prefixe on outgoing call forwaded to IP GSM gateway
I have cisco CME 3.0 instralled on cisco 3745 router
1. all call between cisco ip phone is working fine
2. some call are forwaded to internet
3. some other are forwaded to FXO lines
4. I am installing IP GSM gateway, this gateway is connected on the same switch as CME and IP phone : 4 (begining by 3 or 5 or 6 or 9)types of outgoing call should be forwaded to GSM gateway. And all GSM gateway incoming call should be forwaded to one internal IP phone
I have already configured 3 types (begining by 5, 3 and 6)all incoming and outgoing are working
I have a problem with outgoing and incoming call begining by 9 (for example 956 58 63)
I want that for outgoing call if user want to call number 9xxxxxx, he should dial 759xxxxxx and CME remove prefixe 75 and send only 9xxxxxx to GSM gateway
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...