Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configure second line in ATA 187

I am having an ata 187, which i successfully added in the call manager (ver 8.6.2). Now i need to add the second line in the ata and connect a another device there. Please help me with the configuration for the same. Also do we need any additional license for enabling the second line.

 

Regards,

Alex George

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Silver

http://www.cisco.com/c/en/us

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/187/1_0/english/administration/guide/sip/187adm80/a187_ag2str.html#wp1102295

Second port is new device with MAC shifted and add "01" at the end.

You would need additional essential UCL license for this...

 

HTH,

Dragan

HTH, Dragan
1 REPLY
Silver

http://www.cisco.com/c/en/us

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/187/1_0/english/administration/guide/sip/187adm80/a187_ag2str.html#wp1102295

Second port is new device with MAC shifted and add "01" at the end.

You would need additional essential UCL license for this...

 

HTH,

Dragan

HTH, Dragan
67
Views
0
Helpful
1
Replies