The fastest way to get a complete list of phones with macs and extensions is by using the realtime monitoring tool and going under Device->DeviceSearch and then you can perform a search based on the criteria you specify. Unfortunately this does not provide a printable report. There is a 3rd party tool at CMRreports that will do this but it is fairly expensive.
Otherwise you will need a SQL report that links the Device table to the NumPlan Table.
Another option would be to poll the phones themselves via a pearl script. Reading the phones HTML into a file and then parsing the data.
Unfortunately there is no pretty way to do this in 4.1
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...