Configuring a Media Termination Point on 3845 and CUCM 4.1.3

[acerda]

Hi Dear All,

I just would like to know how configure a MTP on a 3845 router (registered as MGCP at the CUCM) and I associate on the CUCM 4.1.3

Please send me some examples.

Regards

Andres

[Jaime Valencia · Accepted solution]

Enhanced Transcoding and Conferencing for IOS Voice Gateways in a CallMananger Network using DSP Resources Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008084fe1f.shtml

Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html

HTH

java

if this helps, please rate