Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configuring a VG350 in CUCM 9.1

Purchased a VG350 and I am having some trouble getting it to register with Call Manager 9.1...I can program the ports in CUCM, but they never register.  I am used to working with a VG248 which communicates and activates ports with CUCM very differently than the VG350.  Can anyone provide me some programming assistance.  I am used to working with SRST gateways, but this seems to fall in the middle of the SRST and VG248 so I am confused about where to go from here.  Is there some documentation I can read, I don't mind learing about the configuraiton in detail....thanks.

  • IP Telephony
Everyone's tags (1)
3 REPLIES
Hall of Fame Super Silver

Configuring a VG350 in CUCM 9.1

What protocol are you using to control the ports SCCP, MGCP, H323 or SIP?

Chris

New Member

Configuring a VG350 in CUCM 9.1

Sorry....forgot to mention...SCCP.  Thanks

Hall of Fame Super Silver

Configuring a VG350 in CUCM 9.1

You configure it the same as VG224, these as oppose to VG248 are IOS based so IOS needs to be configured:

Quick google revleas many good posts and videos, here is one:

http://www.icciev.com/1/post/2011/09/adding-vg224-to-cucm-80-as-sccp-or-mgcp-gateway-differences-and-configurations-part-2.html

HTH,

Chris

674
Views
5
Helpful
3
Replies
This widget could not be displayed.