Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring BLF on CUCM 4.2

Hi,

I need to configure the BLF on 7960 to monitor another directory number...

I did the follow configuration:

- Phone button template (add a softkey to Call Park BLF)

- Device > IP phone is using the phone template correct

- Add a BLF on device > ip phone, but the new BLF botton is not available after update..

Can you help please?

thanks

3 REPLIES
Green

Configuring BLF on CUCM 4.2

Hi,

Did you add a BLF from the phone config page.

See this link

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmcfg/b06phone.html#wpmkr1274942

Regards

Alex

Regards, Alex. Please rate useful posts.
Hall of Fame Super Red

Configuring BLF on CUCM 4.2

Hi Jean,

Sadly...the only BLF config available in CUCM 4.2 (any release) is the Directed Call Park BLF

as described;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_1/ccmcfg/b05dpark.html

The built-in SD-BLF or simple BLF within CUCM was not added until the 5.x release

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmfeat/fsprsnc.html#wp1109780

Cheers!

Rob

PS: in 4.2.x your best bet would be a "shared" line with the ringer selection of the DN silenced.

New Member

Configuring BLF on CUCM 4.2

Ok thanks All.

bye.

430
Views
5
Helpful
3
Replies
CreatePlease login to create content