Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Configuring CUBE for SIP trunking

We have a new Voice system on the horizon and I need to see if I can set up the IP2IP gateway routers to work with Call Manager.

I have the Cisco document:

Configuring and Troubleshooting Cisco UC Manager SIP Trunking with Cisco Unified Border Element"

I was wondering if there is a template on this document I could go by to get the IP2IP Gateway router configured prior to integrating with Call Manager.

At the moment, Verizon is saying:

"SBC sessions are down at this time, we are sending options pings to the customer however we are receiving any response back."

Could I use the document above and paste some of the config and then get it refined later?

1 REPLY
Silver

Re: Configuring CUBE for SIP trunking

697
Views
0
Helpful
1
Replies
CreatePlease to create content