cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
222
Views
0
Helpful
1
Replies

Configuring direct lines for managers on FXO cards

solomonthuo
Level 1
Level 1

Hi all

I have this configuration below in a cisco 2801 router running CCME. I have configured connection Plar directing external calls to specific extensions. I have a problem with ensuring that outbound calls from a manager on extension 203 are always routed to voice port 0/0/0 and that all other outbound calls from other users don't ever use this voice port 0/0/0. The main aim is having a fixed/direct line for manager on extension 203.

voice-port 0/0/0

dial-type pulse

no non-linear

cptone GB

connection plar opx 203

impedance complex2

caller-id enable

!

voice-port 0/0/1

dial-type pulse

no non-linear

cptone GB

connection plar opx 206

impedance complex2

caller-id enable

!

voice-port 0/0/2

dial-type pulse

no non-linear

cptone GB

connection plar opx 208

impedance complex2

caller-id enable

!

voice-port 0/0/3

dial-type pulse

no non-linear

cptone GB

connection plar opx 207

impedance complex2

caller-id enable

!

dial-peer voice 1 pots

preference 2

destination-pattern 9T

port 0/0/0

!

dial-peer voice 2 pots

destination-pattern 9T

port 0/0/1

!

dial-peer voice 3 pots

preference 1

destination-pattern 9T

port 0/0/2

!

dial-peer voice 4 pots

destination-pattern 9T

port 0/0/3

dial-peer voice 203 voip

destination-pattern 203

session target ipv4:192.168.42.1

dtmf-relay h245-signal

codec g711ulaw

!

dial-peer voice 206 voip

destination-pattern 206

session target ipv4:192.168.42.1

dtmf-relay h245-signal

codec g711ulaw

!

dial-peer voice 208 voip

destination-pattern 208

session target ipv4:192.168.42.1

dtmf-relay h245-signal

codec g711ulaw

!

dial-peer voice 207 voip

destination-pattern 207

session target ipv4:192.168.42.1

dtmf-relay h245-signal

codec g711ulaw

Regards

Sollo

1 Accepted Solution

Accepted Solutions

paolo bevilacqua
Hall of Fame
Hall of Fame
1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

Hello,

Use 'trunk' under ephone-dn:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_command_reference_chapter09186a0080611369.html#wp1094625

Hope this helps, please rate post if it does!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: