Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring external calls in CUCM 8.6

Hello to all ,

I have a CUCM 8.6.2.20000-2 and I need to configure the external calls . In the past we has configured the calls and gateways in MGCP , but today we need to configure in H.323 :

GATEWAY CONFIGURATION ( MGCP Configured )

!

voice service voip

h323

!

!

voice class codec 1

codec preference 1 g711ulaw

codec preference 2 g711alaw

codec preference 3 g729r8

codec preference 4 g729br8

!

!

!

voice class h323 1

h225 timeout tcp establish 2

!

!

!

!

voice class custom-cptone 1

dualtone disconnect

  frequency 450

  cadence 300 200

!

!

!

!

ccm-manager fallback-mgcp

ccm-manager mgcp

!

!

mgcp

mgcp call-agent X.X.X.X 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

!

mgcp profile default

!

Thanks for the help !

Hugo

Everyone's tags (2)
6 REPLIES
Cisco Employee

Configuring external calls in CUCM 8.6

There are plenty of docs on CCO on CUCM with H323 configuration, have you searched for any of those and tried to follow the instructions???

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Configuring external calls in CUCM 8.6

Hello javalenc ,

Thanks for your time , I am looking for an expert user who can give me some advice in this problem .

I still trying to resolve this

Cisco Employee

Configuring external calls in CUCM 8.6

And what problem is exactly you're facing??? your post only mentions you want to configure calls using H323 and for that the links on CCO will suffice

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: Configuring external calls in CUCM 8.6

New Member

Configuring external calls in CUCM 8.6

Thanks Leonardo and Jaime :

I am reading the documentation now . My problem is with the outbound calls , I guess is about dial-peer voice configuration in h323 .

Thanks in advance

Hugo

Re: Configuring external calls in CUCM 8.6

You need the dial-peers pointing to the PSTN, and you need to send the digits on the format accepted by the Telco.

If you are using an E1/T1 you use a pots dial-peer or if you re using a SIP Trunk you use a voip dial-peer pointing to the SIP Proxy.

Take a look on this doc:

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/dial_peer/dp_confg.html

Rate this if helps you

Regards

Leonardo

542
Views
0
Helpful
6
Replies