Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Configuring sip channels on cisco 2911 Gateway

I have got 4 Cisco 7960 IP Phones Registered with this Router. I have got 4 SIP Channels. Could anyone suggest any link or configuration to do on this router to make SIP calls. I would like to configure these channels on this router. I have already running ISDN 2 lines using this gateway router.

Thank You

Regards

3 REPLIES

Configuring sip channels on cisco 2911 Gateway

Is this in conjunction with CUCM, CME or something else as a "PBX"?

=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

Please remember to rate useful posts, by clicking on the stars below.

New Member

Configuring sip channels on cisco 2911 Gateway

Im Using CME right now.

Configuring sip channels on cisco 2911 Gateway

well you would need to start creating a dial peer that points to your ITSP.

check this repost of a cisco Live prezzo on "PSTN" SIP Trunk configuration:

http://stor.balios.net/Live2012/july-26-cube-randy-wu-presentation-regular-size-modified-randy.pptx.pdf



=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

Please remember to rate useful posts, by clicking on the stars below.

207
Views
0
Helpful
3
Replies
CreatePlease to create content