Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

VIP Super Bronze

configuring TCL script for SRST

Hi guys,

I have a customer who wants a prompt to be played saying " we are sorry we cannot connect your call please dial xxxx" during SRST mode.

I believe all I need to d is to record the prompt and place in router flash and then reference it in my paramete confi as follows...

application

service queue flash:app-b-acd-2.1.0.0.tcl

param queue-manager-debugs 1

service aa flash:app-b-acd-aa-2.1.0.0.tcl

paramspace english index 1

paramspace english language en

paramspace english location flash:

param service-name queue

param handoff-string aa

param aa-pilot 405...

param welcome-prompt _welcome.au

!

dial-peer voice 222 voip

service aa

destination-pattern 405...

session target ipv4:192.168.1.1

incoming called-number 405...

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

Will this work? How does the scrip temrinate the call after the prompt has been played, or can the prompt be replayed for about 3 times before it is disconnected.

Also, how do I ensure that this is only played during SRST and not during normal operation?

Thanks

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
1 REPLY
Hall of Fame Super Gold

Re: configuring TCL script for SRST

You can use the simple disconnect script that I wrote for the purpose:

http://pbevila.fastmail.fm/public/disconnect.tcl

159
Views
0
Helpful
1
Replies