Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

configuring WL profile on 7925g phone

I am using template (which I just created) to configure wireless profile on 7925g phones. This template is saved on network share so all the techs can access it.   Here is what I do now to configure WL on a 7925 phone---

-using usb cable, I plug-in the phone in my laptop

-go to web interface

-go to BackUp Settings

-type the encryption Key (in Backup settings menu)

-import template from network to my phone

-phone reboots

BUT, wireless connection on the phone doesn't work until I go back to web interface and re type the Pre-Shared Key again. Is there anyway to save this key in my template so I don't have to do this step over and over agin? Thanks

3 REPLIES
Hall of Fame Super Gold

configuring WL profile on 7925g phone

New Member

configuring WL profile on 7925g phone

Thanks for your reply but I believe this NOT what I am trying to do....before I add this phone to CUCM, I need to create wireless profile.

Hall of Fame Super Gold

configuring WL profile on 7925g phone

wireless connection on the phone doesn't work until I go back to web interface and re type the Pre-Shared Key again.

Hmmmmm ... Maybe something wrong with the firmware the phone is using?  While you have the phone connected via USB cable, could you upgrade to, say 1.4(3) and later?

120
Views
0
Helpful
3
Replies
CreatePlease to create content