09-07-2009 12:07 AM - edited 03-15-2019 07:39 PM
Hi,
I have a question with ATA devices. Is possible connect serial ATA to modem GSM to make mobile call?
Solved! Go to Solution.
09-07-2009 06:36 AM
User is unable to connect ATA to modem
http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K70834082
Connecting a modem to the ATA is an unsupported hardware configuration and can have undesirable results. The ATA 18x is not designed to work with either PBX or KSU, or any other device except, plain old telephones because it does not provide Sup Disc parameters and it is expecting the end-device (an analog phone) to be hung up manually.
HTH
java
if this helps, please rate
09-07-2009 06:36 AM
User is unable to connect ATA to modem
http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K70834082
Connecting a modem to the ATA is an unsupported hardware configuration and can have undesirable results. The ATA 18x is not designed to work with either PBX or KSU, or any other device except, plain old telephones because it does not provide Sup Disc parameters and it is expecting the end-device (an analog phone) to be hung up manually.
HTH
java
if this helps, please rate
09-07-2009 06:57 AM
Thanks for all.
This information have been so useful.
A greetings
09-07-2009 07:52 AM
Hi Miguel,
Fax and Modem Connectivity
The Cisco VG 224, Cisco VG 204 and Cisco VG 202 support fax machines and modems. When using fax machines, they support Cisco fax relay, T.38 fax relay, and fax passthrough. Cisco or T.38 fax relay technologies allow transfer of faxes across the network with high reliability using less bandwidth than a voice call. All modems can be connected to the Cisco VG 224, Cisco VG 204 and Cisco VG 202 and will be transferred over the network using modem passthrough.
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide