Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Connect ATA to Modem GSM

Hi,

I have a question with ATA devices. Is possible connect serial ATA to modem GSM to make mobile call?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Connect ATA to Modem GSM

User is unable to connect ATA to modem

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K70834082

Connecting a modem to the ATA is an unsupported hardware configuration and can have undesirable results. The ATA 18x is not designed to work with either PBX or KSU, or any other device except, plain old telephones because it does not provide Sup Disc parameters and it is expecting the end-device (an analog phone) to be hung up manually.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
3 REPLIES
Cisco Employee

Re: Connect ATA to Modem GSM

User is unable to connect ATA to modem

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K70834082

Connecting a modem to the ATA is an unsupported hardware configuration and can have undesirable results. The ATA 18x is not designed to work with either PBX or KSU, or any other device except, plain old telephones because it does not provide Sup Disc parameters and it is expecting the end-device (an analog phone) to be hung up manually.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Connect ATA to Modem GSM

Thanks for all.

This information have been so useful.

A greetings

Hall of Fame Super Red

Re: Connect ATA to Modem GSM

Hi Miguel,

Fax and Modem Connectivity

The Cisco VG 224, Cisco VG 204 and Cisco VG 202 support fax machines and modems. When using fax machines, they support Cisco fax relay, T.38 fax relay, and fax passthrough. Cisco or T.38 fax relay technologies allow transfer of faxes across the network with high reliability using less bandwidth than a voice call. All modems can be connected to the Cisco VG 224, Cisco VG 204 and Cisco VG 202 and will be transferred over the network using modem passthrough.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps2250/ps5516/product_data_sheet09186a00801d87f6.html

Hope this helps!

Rob

304
Views
0
Helpful
3
Replies