cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
812
Views
3
Helpful
3
Replies

Connect CME with PBX Huawei using MGCP protocol

connect101
Level 1
Level 1

Is it possible to connect a Cisco Call Manager Express with a Huawei PBX by using protocol MGCP?

The design is as follows :

CME (SIP) <-IP Connection-> (SIP) VoiceGW (MGCP) <-IP Connection -> PBX Huawei(MGCP)

If possible, how to configure the VGateway?

Thanks

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

In the diagram above, CME only uses SIP, so yes that would be possible.

MGCP could be more complicated because the features are tailored to serve Cisco devices. it may work anyway.

Hope this helps, please rate post if it does!

Hi,

Excuse me because it is not a PBX but a MSC Server (Mobile Softswitch Center).

If it's possible, would I configure my CME like I do it with a connection to a Call Manager Server, which using the MGCP?

Can you give me any idea

Best regards

CME could work as MGCP endpoint to the MSC.

On the other hand, if you an higher level of integration, you should use SIP as I mentioned before.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: