I have a problem about connect using Smartport rule a router 2811 ccme to a catalyst 500-24PC. On router run the VoIP system and I have 2 VLAN one default and one Cisco-Voice, but if I configure on one port for 2821 the "router" rule the voice VLAN cannot to be selected. Which is the correct rule to do communicate correctly some IP phone (rule = IP Phone + desktop) and router con CCME?
The port roles are based on the type of devices to be connected to the switch ports.
IP Phone + Desktop: Apply this role to ports that are connected to IP phones.
A desktop device, such as a PC, can be connected to the IP phone. Both the IP phone and connected PC have access to the network and the Internet through the switch port. This role prioritizes voice traffic over data traffic to ensure clear voice reception on the IP phones.
Refer the URL: Catalyst Express 500 Series Switches Configuration:
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...