Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Connect TR1034+P2-1B to Cisco

Hello,

I would like to interconnect a Cisco Router ISDN card with Brooktrout TR1034+P2-1B (BRI). Since I need to give L1 clock from the Cisco side, is this a possible scenario?

Thanks!

met

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Connect TR1034+P2-1B to Cisco

Hi Met,

I have done this many times with PRI, but never BRI.  It has always worked very well and is easy to set up.  I think if you get the cable right everything else will work very well.

Good luck,

Art

If this helps please rate.

6 REPLIES
Silver

Re: Connect TR1034+P2-1B to Cisco

Hi,

Yes - see the attached link

http://www.cisco.com/en/US/docs/ios/12_1t/12_1t3/feature/guide/dtpri_ni.html

HTH,

Art

Please rate if this helps.

New Member

Re: Connect TR1034+P2-1B to Cisco

Hello,

I'm talking about BRI interface. Have you tried it before?

Thanks!

Silver

Re: Connect TR1034+P2-1B to Cisco

New Member

Re: Connect TR1034+P2-1B to Cisco

Thank you very much my friend.

But you think I will not have problems with source clock from Cisco, right? Good Layer1?

Thanks,

met

Silver

Re: Connect TR1034+P2-1B to Cisco

Hi Met,

I have done this many times with PRI, but never BRI.  It has always worked very well and is easy to set up.  I think if you get the cable right everything else will work very well.

Good luck,

Art

If this helps please rate.

New Member

Re: Connect TR1034+P2-1B to Cisco

Thank you, I'll give it a try.

+5 for the kindness!

met

234
Views
0
Helpful
6
Replies
CreatePlease login to create content