Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

connecting fxo to adsl analog line

hello

i have an adsl with adsl/phone splitter

-just want to confirm if can i connect my fxo to the phone part of the splitter?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: connecting fxo to adsl analog line

I've not done it myself but I can't see any reason why not,

the ADSL splitter filters the frequencies for voice (300 - 4000Hz)  from the ADSL frequencies (25KHz - 1.1MHz).  The FXO port will operate in the voice range of those frequencies.

If you start getting ADSL lines re-training everytime you get a phone call I was probably wrong.

Paul

2 REPLIES
Bronze

Re: connecting fxo to adsl analog line

I've not done it myself but I can't see any reason why not,

the ADSL splitter filters the frequencies for voice (300 - 4000Hz)  from the ADSL frequencies (25KHz - 1.1MHz).  The FXO port will operate in the voice range of those frequencies.

If you start getting ADSL lines re-training everytime you get a phone call I was probably wrong.

Paul

New Member

Re: connecting fxo to adsl analog line

thanks...it works

373
Views
5
Helpful
2
Replies
CreatePlease to create content