Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Connection PLAR on FXS port 2821

I have an anlog phone that is located by the main gate.  The phone has been extended and terminated into an FXS port on a 2821 router.  I am trying to configure a connect PLAR on he FXS port, so that when the phone goes off-hook it dials an internal VoIP extension.

I am not having any luck.  Any help would be appreciated.  My config is below:

voice-port 1/0/5

timing hookflash-in 50 0

connection plar 220005

description North gate

caller-id enable

dial-peer voice 220005 pots

destination-pattern 220005

port 1/0/5

dial-peer voice 100 voip

preference 1

destination-pattern 220...

modem passthrough nse codec g711ulaw

session target dns:CallAgent01

voice-class codec 1

voice-class h323 1

dtmf-relay h245-alphanumeric

no vad

Thanks!!

Jaime

3 ACCEPTED SOLUTIONS

Accepted Solutions

Connection PLAR on FXS port 2821

The call won't go to the VoIP DP, if you have a POTs DP that has a better match.

HTH

Regards,

Yosh

HTH Regards, Yosh

Connection PLAR on FXS port 2821

Hi Jamie,

Remove "dial-peer voice 220005 pots"

It should work.

Regards,

Kevin

Connection PLAR on FXS port 2821

Yes you shoudl remove the DP, like Kevin said (+5)

Regards,

Yosh

HTH Regards, Yosh
5 REPLIES

Connection PLAR on FXS port 2821

The call won't go to the VoIP DP, if you have a POTs DP that has a better match.

HTH

Regards,

Yosh

HTH Regards, Yosh
New Member

Connection PLAR on FXS port 2821

Yosh - do I need to remove dial-peer voice 220005 pots for the PLAR to work correctly?

Thanks,

Jaime

Connection PLAR on FXS port 2821

Hi Jamie,

Remove "dial-peer voice 220005 pots"

It should work.

Regards,

Kevin

Connection PLAR on FXS port 2821

Yes you shoudl remove the DP, like Kevin said (+5)

Regards,

Yosh

HTH Regards, Yosh
New Member

Connection PLAR on FXS port 2821

Thanks guys removing the dial-peer worked! 

Jaime

122
Views
5
Helpful
5
Replies