Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Connection to H323 service provider

I need to connect CCM to h323 service provider. I have 2811 (c2800nm-ipvoice-mz.124-13a.bin) which is connected to h323 provider. I need to know what configuration i must do on 2811 and what to do on CCM. Thx in advance.

2 REPLIES
Community Member

Re: Connection to H323 service provider

Hello,

Try this link for an overview of IP-IP Gateway. It is titled Cisco CallManager to H.323 Service Provider Connectivity.

http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_guide_chapter09186a00806b0a0f.html#wp1299753

You will then need to simply add the H323 GW into CCM. Don't forget to Bind your H323 signalling to a specific address. Also replace your default inbound voip dialpeer.

Please rate helpful posts.

Thanks,

Jeff

Hall of Fame Super Gold

Re: Connection to H323 service provider

Hi,

only think jgolia hasn't mentioned in his good advice, is that you also need a different image (the IP-to-IP gateway one) on the 2811. These image names ends in _ivs. Cisco requires a license too.

The alternative is to enable direct IP communication between CCM and the h323 service provider.

131
Views
4
Helpful
2
Replies
CreatePlease to create content