I have a few 7912 that I used to use in a sip environnement with asterisk(lab environnment only). I want to convert these sip phone to sccp to be able to use them with CME. The CME router is running cme 4.0 and Cisco ip communicator is working fine on it. What is the process to convert these phones to sccp? Do I need to do this via the cme with a particular command? Can I reset these 7912 to factory default?
7912 utilities zipfile? Is that a new image that I need to download ? If so what is the exactly name for this file? I already download and upload the SCCP fine into the CME router. As the phone as sip firmwaer, they cannot register with the cme.
The command prompt returned the following error message: CAN'T OPEN CP7912080001SIP060412A. I have tried with and without the extension with no luck. I also tried to replace the SIP file by the SCCP file.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.