There's also an option in BAT to 'insert device profiles' 'based on devices controlled by users'. I understand this generates UDPs based on the user associations to phones (i.e. creates a UDP with the users' line and relevant device fields). You'd probably still have lots of tidy up to do (making the physical phones 'logged off' phones, subscribing services etc).
I'd read the documentation for that routine carefully, and take a backup. Probably even try it in VMware first.
Personally I'd prefer more control and would export all the phones/users, and generate the files from that. That's not something I could talk you through on a forum though...
I understand the route you're talking about. I am very experienced with BAT import/export but was just wondering if there was something that I was missing that would make this a rather quick and painless process.
Looks like I'll have to go with what yo mentioned as far as exporting all the existing phone data and inserting the UDP's based on the information I pull from the export.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...