Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

COR List for Outgoing Calls to specific FXO POTS ports not working

                   I have a 1760 CME with one FXO card with two POTS lines comming into it. I found this COR list dial-plan that is supposed to make one extension always dial out on it's assigned FXO port. It is assigned it's outgoing port by the "answer-address 1001" or "answer-address 1002" statement. The dial plan works fine, for actual dialing. The problem is, it is not selecting the specific FXO port for whatever extension it is defined for. My plan here has ext 1001 using FXO port 2/1 and ext 1002 using FXO port 2/0. It seems it's just random on what port it uses when I dial out from either 1001 or 1002. Is there somewhere else I have to make a statement so that the "answer-address" definitly picks up on weather extension 1001 or 1002 is used?

dial-peer cor custom

name port21

name port20

!

!

dial-peer cor list use21

member port21

!

dial-peer cor list use20

member port20

!

dial-peer voice 100 pots

corlist outgoing use21

description 10 Digit Dialing

destination-pattern 9[2-9]..[2-9]......

port 2/1

forward-digits 10

!

dial-peer voice 101 pots

corlist outgoing use21

description Long Distance Dialing

destination-pattern 91..........

port 2/1

forward-digits 11

!

dial-peer voice 201 pots

corlist outgoing use20

description 10 Digit Dialing

destination-pattern 9[2-9]..[2-9]......

port 2/0

forward-digits 10

!

dial-peer voice 202 pots

corlist outgoing use20

description Long Distance Dialing

destination-pattern 91..........

port 2/0

forward-digits 11

!

dial-peer voice 10 voip

corlist incoming use21

answer-address 1001

!

dial-peer voice 20 voip

corlist incoming use20

answer-address 1002

!

ephone-dn 1
number 1001
pickup-group 5000
name PHONE-1
call-forward busy 3000
call-forward noan 3000 timeout 14
!
!
ephone-dn 2
number 1002
pickup-group 5000
name PHONE-2
call-forward busy 3000
call-forward noan 3000 timeout 14

1 ACCEPTED SOLUTION

Accepted Solutions
Green

COR List for Outgoing Calls to specific FXO POTS ports not worki

Hi,

Try using this

ephone-dn 1
number 1001
pickup-group 5000
name PHONE-1
call-forward busy 3000
call-forward noan 3000 timeout 14
corlist incoming use21
!

!
!
ephone-dn 2
number 1002
pickup-group 5000
name PHONE-2
call-forward busy 3000
call-forward noan 3000 timeout 14
corlist incoming use20
!

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
3 REPLIES
Green

COR List for Outgoing Calls to specific FXO POTS ports not worki

Hi,

Try using this

ephone-dn 1
number 1001
pickup-group 5000
name PHONE-1
call-forward busy 3000
call-forward noan 3000 timeout 14
corlist incoming use21
!

!
!
ephone-dn 2
number 1002
pickup-group 5000
name PHONE-2
call-forward busy 3000
call-forward noan 3000 timeout 14
corlist incoming use20
!

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
New Member

COR List for Outgoing Calls to specific FXO POTS ports not worki

Thanks so much for the fix. I knew the direction I wanted to take to fix my problem, I just didn't know where to make a change. Thanks again!!!

Green

COR List for Outgoing Calls to specific FXO POTS ports not worki

Hi,

Thank you for your rating.

It is all about learning.

You are very Welcome my friend.

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
1175
Views
5
Helpful
3
Replies