11-13-2008 10:24 AM - edited 03-15-2019 02:31 PM
I set several corlist in CME 4.3 they work fine for SCCP phones. I have some liksys phone (SIP phones) in which I tried to apply some of these corlist but when I apply it I call still dial to the number I should not.
these are the config for corlist
dial-peer cor custom
name 9044
name 9045
name 901
name 900
name 9001
name local
name internas
!
dial-peer cor list Cell
member 9044
!
dial-peer cor list LADA
member 901
!
dial-peer cor list LADA-cell
member 9045
!
dial-peer cor list EU-CANADA
member 9001
!
dial-peer cor list Internacional
member 900
!
dial-peer cor list Ventas
member 9044
member 9045
member 901
member local
!
dial-peer cor list Ingenieria
member 9044
member 9045
member 901
member 900
member 9001
member local
!
for the sip phone I set
voice register pool 5
id mac 000E.08D0.4E75
number 1 dn 5
cor outgoing Cell 1 9044 ---> **I should just dial to cell phones but I can dial to any phone ***
dtmf-relay sip-notify
username 3252 password 3252
codec g711ulaw
dial-peer voice 202 pots
corlist outgoing Cell
description Cellular Calls
destination-pattern 9044..........
direct-inward-dial
port 0/2/0:1
prefix 044
there is something left in my config???
regards
Solved! Go to Solution.
11-19-2008 02:18 PM
Configure under voice register pool:
"corlist incoming
11-19-2008 02:18 PM
Configure under voice register pool:
"corlist incoming
11-21-2008 07:18 AM
hi,
thanks a lot for your info,
now it works the corlist in linksys phone
the correct command is:cor incoming Cell default
regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide