Re: Corporate/Local Directory not accessible on 7945 phones in C - Cisco Community

7707

Views

8

Helpful

24

Replies

Hello all,

I have a CME system that has 2 7945 phones and 5 IP Communicators

on the 7945 phones the corporate/local directory does not show up, neither does the speed dials. Only the missed,placed, recevied calls.

however on the IP communicators the directory is there as well as the speed dials.

has anyone run into this before?

I tried updating the firmware however that did not change anything,

thanks!

Ken

24 Replies 24

Check "show telephony-service" tftp-bindings to know the XML files related to the phones.

Then do "more xxxxx" and check if is has the services and directory in there.

what if it is not listed under show telephony service?

not on sight at the moment, so would like to gather as much data before heading back to customer site

thanks!

Ken

CME systems cannot be managed without remote access.

Customers nomrally request different things daily and is too inconvenient to travel on site every time.

I agree, however they do not have the vpn up and running yet... so i'm stuck going onsite.

what should i do if the items you said to look for are not there?

any solution?

thanks

Ken

here is the show telephony-service... i didn't see a TFTP Bindings on it

OptimaCME#show telephony-service

CONFIG (Version=7.1)

=====================

Version 7.1

Cisco Unified Communications Manager Express

For on-line documentation please see:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html

ip source-address 192.168.130.253 port 2000

ip qos dscp:

ef (the MS 6 bits, 46, in ToS, 0xB8) for media

cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal

af41 (the MS 6 bits, 34, in ToS, 0x88) for video

default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup

load 7910 P00403020214

load 7960-7940 P00307020200

load 7945 term45.default

max-ephones 30

max-dn 60

max-conferences 8 gain -6

dspfarm units 1

dspfarm transcode sessions 10

dspfarm 1 MTP001

conference software

privacy

no privacy-on-hold

hunt-group report delay 1 hours

hunt-group logout DND

max-redirect 10

voicemail 8000

cnf-file location: system:

cnf-file option: PER-PHONE

network-locale[0] US (This is the default network locale for this box)

network-locale[1] US

network-locale[2] US

network-locale[3] US

network-locale[4] US

user-locale[0] US (This is the default user locale for this box)

user-locale[1] US

user-locale[2] US

user-locale[3] US

user-locale[4] US

srst mode auto-provision is OFF

srst ephone template is 0

srst dn template is 0

srst dn line-mode single

moh music-on-hold.au

time-format 12

date-format mm-dd-yy

timezone 12 Eastern Standard/Daylight Time

call-park system application

no transfer-pattern is configured, transfer is restricted to local SCCP phones only.

keepalive 30 auxiliary 30

timeout interdigit 5

timeout busy 10

timeout ringing 180

timeout transfer-recall 0

timeout ringin-callerid 8

timeout night-service-bell 12

caller-id name-only: enable

system message Optima Services

web admin system name cmeadmin password kn0wh0w

web admin customer name Customer

edit DN through Web: enabled.

edit TIME through web: enabled.

Log (table parameters):

max-size: 150

retain-timer: 15

create cnf-files version-stamp Jan 01 2002 00:00:00

transfer-system full-consult

transfer-digit-collect new-call

multicast moh 239.0.0.1 port 2000

auto assign 19 to 23

local directory service: enabled.

Extension-assigner tag-type ephone-tag.

As mentioned above.

Do "show telephony-service tftp-bindings", then do "more xxxx" for the XML config files for the phones with the problem.

Here is the output from that command. I don't see anything files for the 7945 phones like i see below with the 7960

OptimaCME#show telephony-service tftp-bindings

tftp-server system:/its/united_states/7960-tones.xml alias United_States/7960-tones.xml

tftp-server system:/its/united_states/7960-font.xml alias English_United_States/7960-font.xml

tftp-server system:/its/united_states/7960-font.xml alias English_United_States/7920-font.xml

tftp-server system:/its/united_states/7960-dictionary.xml alias English_United_States/7960-dictionary.xml

tftp-server system:/its/united_states/7960-kate.xml alias English_United_States/7960-kate.xml

tftp-server system:/its/united_states/7960-kate.xml alias English_United_States/7920-kate.xml

tftp-server system:/its/united_states/SCCP-dictionary.xml alias English_United_States/SCCP-dictionary.xml

tftp-server system:/its/vrf1/MTP001.cnf.xml alias MTP001.cnf.xml

tftp-server system:/its/vrf1/SEP0016178CE38E.cnf.xml alias SEP0016178CE38E.cnf.xml

tftp-server system:/its/vrf1/SEP001A4B804BD0.cnf.xml alias SEP001A4B804BD0.cnf.xml

tftp-server system:/its/vrf1/SEP0013E81CE381.cnf.xml alias SEP0013E81CE381.cnf.xml

tftp-server system:/its/vrf1/SEP000854B274B2.cnf.xml alias SEP000854B274B2.cnf.xml

tftp-server system:/its/vrf1/SEP000000008000.cnf.xml alias SEP000000008000.cnf.xml

tftp-server system:/its/vrf1/SEP000000008001.cnf.xml alias SEP000000008001.cnf.xml

tftp-server system:/its/vrf1/SEP000000008002.cnf.xml alias SEP000000008002.cnf.xml

tftp-server system:/its/vrf1/SEP000000008003.cnf.xml alias SEP000000008003.cnf.xml

tftp-server system:/its/vrf1/SEP000000008004.cnf.xml alias SEP000000008004.cnf.xml

tftp-server system:/its/vrf1/SEP000000008005.cnf.xml alias SEP000000008005.cnf.xml

tftp-server system:/its/vrf1/SEP000000008006.cnf.xml alias SEP000000008006.cnf.xml

tftp-server system:/its/vrf1/SEP000000008007.cnf.xml alias SEP000000008007.cnf.xml

tftp-server system:/its/vrf1/SEP0021864FD408.cnf.xml alias SEP0021864FD408.cnf.xml

tftp-server system:/its/vrf1/SEP001E65912A0C.cnf.xml alias SEP001E65912A0C.cnf.xml

tftp-server system:/its/vrf1/SEP00247EDEB61B.cnf.xml alias SEP00247EDEB61B.cnf.xml

tftp-server system:/its/vrf1/SEP00161756FFF2.cnf.xml alias SEP00161756FFF2.cnf.xml

tftp-server system:/its/SEPDEFAULT.cnf alias SEPDefault.cnf

tftp-server system:/its/vrf1/XMLDefault.cnf.xml alias XMLDefault.cnf.xml

OptimaCME#

Two of these files are for the 7945s, execute "more" on them.

do i just type more and the file name? from the command line?

not sure what your asking me to look at

i figured out what you were asking.

what am i looking for in the .xml file?

if its not there how do i add it?

thanks

Yes as mentioned in my first post.

You will be looking at URL for phone services and local directory.

I see this in there

http://192.168.130.253:80/localdirectory

what now? that is the address of the CME router

it is also the same line for the phones that can access the directory.

Actually i just rechecked the MAC address of the phones with the problem

there is NO .xml file listed for them.

how can i add it?

Under the ephone, and configure type also.

Then do "create cnf-files" under telephony-service.