I have a location where we have deployed Voip with a new phone system. We have seperate VLANs for both voice and data.
I can understand needing COS when we extend this out to interconnect facilities across our WAN but do I need to establish COS on the actual LAN? There is not a large user population at this facility and I do have gigabit for the backbone. Utilization on the LAN is hardly measurable when we look at either device or uplink statistics. Call performance seems to be fine from the user's standpoint.
Anyone have a recommended doc with guidelines or a checklist for implementation? Any other suggestions or recommendations? This is our first full scale deployment and I want to make sure we are not creating a sleeping monster somewhere.
We unfortunately/fortunately do not use CM. I have had and heard several conversations from both sides of this decision. The telecom side of the house settled on Avaya as the standard phone platform. This location has an Avaya IP Office 406 installed at this location.
In regards to the switches they have a 4506 for the core and 21 2950/2960s covering the plant floor across three buildings.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4