Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Could not add voip dialpeer in cme9.1

Hi All,

I was trying to add voip dialpeers and i am getting this "error could not add dialpeer" i have seen some threds with relates to this problem it was describing  to decrease the maximum dns in the telephony service i have the max-dn 201, max-ephones 165 configured so if i do this in the production environmbent does will it effect my existing phones configured on the cme9.1 2921 router.

2 REPLIES
New Member

Re: Could not add voip dialpeer in cme9.1

You might want to check your log buffer on your CME. I had this exact issue in the past and reducing the size of the logging buffer cleared that particular issue for me.

Sent from Cisco Technical Support iPhone App

VIP Super Bronze

Could not add voip dialpeer in cme9.1

Every dial-peer consumes memory, as does the logging buffer and many other things. Assuming you haven't hit the max-ephone / max-dn quantity the router is likely out of memory.

Please remember to rate helpful responses and identify helpful or correct answers.

160
Views
5
Helpful
2
Replies
CreatePlease login to create content