Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Could not register mobile communicator with CM7

how to register mobile commnicaotr on symbian,nokia E61, to callmanager 7? i have tried to check several thing, document guide but until now no resouce to find, do anyone had a chance to use this before, how to config?

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: Could not register mobile communicator with CM7

Cisco Unified Mobility that is built into UCM consists of Mobile Connect (aka Single Number Reach) and Mobile Voice Access (aka DISA).

The Nokia E61 can also register as a SCCP phone when connected on a WiFi network if you purchase the license from Nokia.

Mobile Communicator requires a CUMA server.

3 REPLIES
Green

Re: Could not register mobile communicator with CM7

In order to Install and use CUMC (Mobile Communicator) you will need to setup a CUMA (Mobile Advantage) server

http://www.cisco.com/en/US/products/ps7271/products_user_guide_list.html

Community Member

Re: Could not register mobile communicator with CM7

so what 's about mobility that CM6-7 support , did not mobile communicator also? cause i seen device in ipphone,

in case if we need to buy mobility advantage , do we have to buy software and license also.

anyway thank you in advance

VIP Super Bronze

Re: Could not register mobile communicator with CM7

Cisco Unified Mobility that is built into UCM consists of Mobile Connect (aka Single Number Reach) and Mobile Voice Access (aka DISA).

The Nokia E61 can also register as a SCCP phone when connected on a WiFi network if you purchase the license from Nokia.

Mobile Communicator requires a CUMA server.

202
Views
0
Helpful
3
Replies
CreatePlease to create content