New to this forum here.
I have the problem with registering 6921 to our call manager, it's not getting ip address from DHCP, however, another phones like 7945, 7942, 7962 have no problem what so ever...
Workarounds I've tried were manually putting static ip address or change the port mode to trunk, then the phone works fine, however it's not the permanent solution.
If someone had the similar problem and let me know what's your solution will be much appreciated!
Solved! Go to Solution.
Are these phones new out of the box?
Please remember to rate useful posts, by clicking on the stars below.
You are using old firmware and below bug is DHCP related bug for same phone. This bug affect all the modela so may be not your case But you can upgrade the firware and see.
Rate all helpful post by clicking stars below the answer.
If the firmware upgrade doesn´t solve the issue, make sure you are pointing the IP phone to the correct DHCP server. You can span a switchport on the switch you are connecting the device, to get a packet capture. That will let you know what the phone is receiving when it´s sending the DHCP request. It may be a vlan configuration error on the switchport.
Here you have another thread where they explain how to span a switchport:
Hi guys, really appreciate your great help, the phone can register to the CM after we upload the new firmware. Thanks a lot :-)