Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CP-7911G Wall Plate Mount

I am trying to mount a 7911 phone to the wall using a standard wall plat.  Apparently the holes do not line up.  Does anyone know of a wall plate in which the 7911 can mount flat on the wall?

The Cisco locking wall bracket is not good for my application and since it tilts the phone up.

Everyone's tags (5)
3 REPLIES
Hall of Fame Super Red

Re: CP-7911G Wall Plate Mount

Hi Michael,

The spacing of the Back-side mounting holes enables direct mounting

to the Electrical box, no Mounting plate is required

Cheers!

Rob

Community Member

Re: CP-7911G Wall Plate Mount

Is there a specific screws to use for the best fist?

Also is there a plate i can use to mount the RJ45 port behind the phone so its not an empty electrical box.

Hall of Fame Super Red

Re: CP-7911G Wall Plate Mount

Hi Michael,

The mounting holes are pretty forgiving and will work with

a number of Screws. We found the "best" fit was to use

a 1mm x 1mm (round head Phillips)

I have not seen a Mounting plate that would work within an

electrical box We are an "Amp" cabling infrastructure

shop, so a Part# like the following worked well within the

box ;

http://www.ampnetconnect.com/product_cut_sheet.asp?pn=137519100

Cheers!

Rob

2920
Views
5
Helpful
3
Replies
CreatePlease to create content