Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

create DN in Callmanager 4.1

Hi All,

I have not worked a lot with callmanager 4.1. How can I create DN without to create phones? In CUCM, DN can be created without to assign to any phone. can we do the same thing in CM 4.1?

thanks

Alex

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: create DN in Callmanager 4.1

the DN alone creation is not implemented in CCM, only in CUCM. you'll have to create the phones using another MAC address, then delete them and they will go to unassigned DNs. that is the only way

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
4 REPLIES

Re: create DN in Callmanager 4.1

ok the question is what the idea in doing this ?

New Member

Re: create DN in Callmanager 4.1

thanks for reply,

We have 100 DID range, I'd like to create all extensions corresponded to the DID before to assign to any phone then show admin assistant how to add those DN to the phones. like CUCM 6.1

thanks again

Alex

Bronze

Re: create DN in Callmanager 4.1

Hi, you can insert the lines/phones with BAT and create dummy Mac address, then you can choose the DN and change it with the correct MAC Address.

Hope this help.

David.

Cisco Employee

Re: create DN in Callmanager 4.1

the DN alone creation is not implemented in CCM, only in CUCM. you'll have to create the phones using another MAC address, then delete them and they will go to unassigned DNs. that is the only way

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
153
Views
0
Helpful
4
Replies