Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Creating a Route Pattern

CUCM 6.1

Okay. I have a simple head knowledge question that I'm sure will be easily answered. When I attempt to create a Route Pattern and Save, a pop-up tells me that it will reset the gateway/route list if I proceed. What does this mean exactly? Should I not do this during business hours, or will it reset and be seamless to anyone using phones? Any risk?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Creating a Route Pattern

Hi Steve,

The "Rule of Thumb" here is this;

If the Route Pattern destination is pointed directly to the gateway PRI, it drops calls currently in progress when Reset.

If the Route Pattern is pointed to the Route Group/Route List, it does not reset the gateway, and calls in progress are not dropped.

For me, I prefer to do the changes during a Maintenance window.

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: Creating a Route Pattern

Hi Steve,

The "Rule of Thumb" here is this;

If the Route Pattern destination is pointed directly to the gateway PRI, it drops calls currently in progress when Reset.

If the Route Pattern is pointed to the Route Group/Route List, it does not reset the gateway, and calls in progress are not dropped.

For me, I prefer to do the changes during a Maintenance window.

Hope this helps!

Rob

Community Member

Re: Creating a Route Pattern

...and how long does a Gateway PRI reset take generally. Are we talking seconds, 2 minutes, ...?

Just so I know when I perform this action during my maintenance window. :)

137
Views
0
Helpful
2
Replies
CreatePlease to create content