I'm having trouble with a router. I can't use csim to dial out. The command works, it seems, but I get a message like this :
csimSetupPeer call setup err rc(-5)
The router is registerd to Callmanager (SRST) and callmanager can make calls through it without problems. However calls from the router itself or from local registered ephones(callmanager failure) do not work.
The settings between callmanager and the router are the same for the voice port.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...