Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

CSIM START

Hi,

We have 5 ISDN interfcae and all the Dial-peer has .T which is mapped to all the five Interfaces.

We just want to check O/B call specific to one interface without any change in destination-pattern or Prefernece.

Is there any command to check in VG, Even i checked with CSIM START but i couldn't find any command to check for particular interface.

Please suggest.

SIVANESAN R       

SIVANESAN R
4 REPLIES
Hall of Fame Super Gold

CSIM START

You can try "show dialplan  number xxx timout". However, it doesn't work for all cases, and you will need to genererate real test calls.

CSIM START

Paolo - I just want to make O/B call from VG by using one particular interface, Is there any command to check.

SIVANESAN R

SIVANESAN R
Hall of Fame Super Gold

CSIM START

Answered above.

New Member

Re: CSIM START

Csim start and the number. E.g

Csim start xxxxxxx
Debug isdn q.931 (if using isdn)
Term mon

If you have multiple T1 / E1's and you want to test calls out of a particular trunk, create a specific test dial peer, something 56.t and specify the voice port you want the call to go out of.

E.g

Dial peer voice 5600 pots
Destination-pattern 56.t
Port 0/0/0:23

Or port 0/0/0:30 if using E1.

Sent from Cisco Technical Support iPhone App

732
Views
0
Helpful
4
Replies