In couple of reports in UCCX Real Time Reporting (UCCX Admin->Tools->Real Time Reporting) you can see how many active CTI ports in use.
1. Reports->Contact Summary, here the Active parameter will tell you about the calls in Queue (i.e.active CTI ports in use).
2.a.Also please open the Overall Cisco Unified Contact Center Express Report, inbound section, the waiting paramter in Inbound (i.e.calls in Queue) for inbound calls.
2.b.Likewise if you have an IVR outbound calls (started with UCCX 8.5 version), than you need to check the IVR outbound Real time reports for the active calls. Each of the IVR outbound calls will consume one CTI port.
So the addition of 2.a and 2.b will give you the total active CTI ports in use.
Note: Once the caller gets connected with an agent in inbound call scenario, CTI port will be released. Also during call hold time again CTI ports are consumed.
Hope it helps.
Please rate helpful posts by clicking on the stars below the right answers !!
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...