06-06-2014 06:42 AM - edited 03-16-2019 11:01 PM
I have a scenario where SIP trunk from call manager is terminating to a WCDMA call processing exchange for IP to WCDMA calls.I also have a CUBE router which I want to configure as a hardware MTP and I want that SIP trunk to use this hardware MTP configured on the cube. Is this deployment possible?
06-06-2014 07:26 AM
Hello!
Why not?
Configure MTP, register it and add to MRGL for SIP trunk' Device pool.
Regards,
Kirill
06-06-2014 07:54 AM
Hi,
As per the following link
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-border-element/99863-cube-config.html
"An hardware or software MTP can be co-resident on the same router as the Cisco Unified Border Element (on routers platforms that support CUCM MTPs, which include the Cisco 2800 and 3800 series ISRs)."
HTH
Manish
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide