I have a scenario where SIP trunk from call manager is terminating to a WCDMA call processing exchange for IP to WCDMA calls.I also have a CUBE router which I want to configure as a hardware MTP and I want that SIP trunk to use this hardware MTP configured on the cube. Is this deployment possible?
"An hardware or software MTP can be co-resident on the same router as the Cisco Unified Border Element (on routers platforms that support CUCM MTPs, which include the Cisco 2800 and 3800 series ISRs)."
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...