Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUBE: SIP messages 503 to 500

Hello,

I have CUBE installed and configured in between OGW and TGW (regarding network diagram - see below) with allowed only SIP-to-SIP Connections.

In several cases, I'm getting 503 response from TGW, which CUBE sends to OGW as 500.

OGW ------------ CUBE ------------ TGW

==========================

------- INVITE------>|

<-----TRYING ----- |

                          | ------INVITE ---->

                          | <----TRYING ----

                          | <-------183---------

                          | <-------503---------

<---------183----------|

                          | --------ACK------->

<---------500----------|

--------ACK--------->|

My problem is, tahat OGW is sending INVITE again and generates too many calls :-(

I need to get 503 from CUBE to OGW.

Any ideas how to do something like SIP-to-SIP mapping? Or maybe another solution?

Network diagram:

http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_example09186a008092d6b3.shtml#diag

Details:

CUBE: Cisco 2821 IOS: SP Services 12.4(24)T8

Tahnk you,

Mike

Everyone's tags (4)
6 REPLIES
VIP Super Bronze

CUBE: SIP messages 503 to 500

You can configure header-passing error-passthrough

voice service voip

sip

header-passing error-pass through

NB: CUBE supports 503 natively, so I am surprised that 503 is not passed to the other call leg..

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

CUBE: SIP messages 503 to 500

Thanks for your quick answer, but this command is not accessible on my router:

ip2ip-gw(conf-serv-sip)#header-passing ?

 

I tried to enable just accessible part of that command:

!

voice service voip

allow-connections sip to sip

fax protocol t38 nse ls-redundancy 0 hs-redundancy 0 fallback pass-through g711alaw

modem passthrough nse codec g711alaw

sip

  rel1xx disable

  header-passing

  sip-profiles 100

!

...but nothing has changed:

OGW:

-> SIP/SDP Request: INVITE

<- SIP Status: 100 Trying

<- SIP/SDP Status: 183 Session Progress, with session description

<- SIP Status: 500 Internal Server Error

-> SIP Request: ACK

TGW:

<- 195.28.68.18 SIP/SDP Request: INVITE

-> SIP Status: 100 Trying

-> SIP/SDP Status: 183 Session Progress  , with session description

-> SIP Status: 503 Service Unavailable

<- SIP Request: ACK

>>  CUBE supports 503 natively, so I am surprised that 503 is not passed to the other call leg..

May this be IOS dependent issue?

Cisco 2821 IOS: SP Services 12.4(24)T8

VIP Super Bronze

CUBE: SIP messages 503 to 500

This is how you do it..

conf t

voice service voip

sip

header-passing (press enter), then on the next line

error-passthru

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

CUBE: SIP messages 503 to 500

Oh... My bad.

So now it was enabled, but again... no change.

CUBE still answers with 500 instead of 503 :-(

But maybe it make sense...

You wrote that: CUBE supports 503 natively, so I am surprised that 503 is not passed to the other call leg..

This document says that: "SIP error responses that are not supported on the Cisco UBE...".


So maybe I need to investigate, why it's not passing through natively.

Do you know which debug could answer this question?

VIP Super Bronze

CUBE: SIP messages 503 to 500

I suggest you upgrade the IOS on the gateway..What version of IOS are you running..

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

CUBE: SIP messages 503 to 500

My gateway is Cisco 2821 with SP Services 12.4(24)T8 IOS.

That is the latest 12.4T IOS.

I am afraid that I don't have enough RAM/FLASH for IOS 15*.

I have only 254MB of RAM and 64 MB of FLASH.

888
Views
4
Helpful
6
Replies
CreatePlease login to create content