Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM 10.5 - Block Inbound CLID on a DN

We have a phone with two lines on it. We are looking to suppress all inbound caller ID to one of the two lines. 


How can I accomplish this? Thank you.

 

1 ACCEPTED SOLUTION

Accepted Solutions

If you route the call to the

If you route the call to the one of that specific line through Translation Pattern, you can set the "Calling Line ID Presentation & Calling Name Presentation" to Restricted to prevent incoming calling number & name

//Suresh Please rate all the useful posts.
2 REPLIES

If you route the call to the

If you route the call to the one of that specific line through Translation Pattern, you can set the "Calling Line ID Presentation & Calling Name Presentation" to Restricted to prevent incoming calling number & name

//Suresh Please rate all the useful posts.
New Member

Thank you! Created CLID_BLOCK

Thank you! 

Created CLID_BLOCK partition, CLID_BLOCK CSS, translation pattern in my standard partition and set the presentation to restricted. 
 

249
Views
0
Helpful
2
Replies
CreatePlease login to create content