CUCM 10.5: User Device Profiles provisioning possible?
Recently we've Upgraded our CUCM Cluster from 8.6.2 to 10.5 to gain some new features. In the feature list there is a lot of stuff for provisioning and making admin things easier. Right now, if there is a new employee in our company, we manually create the specific UserDeviceProfile for this user and make the settings needed, but it's more or less some standard procedure, which in my opinion, can be created by a template for example.
The phones itself will still be manually created as we need to assign the company logo to the background, installing certificates and stuff like that, which can't (can it be?) be done remotely.
In 10.5 I've seen that under "User Management - User/Phone Add" there are some points where to define different templates. So is there any way in automatically create the user device profiles, for example if the user has been created in the MS Active Directory with the proper filds (ipphone, name, ...)? I haven't found a manual for this scenario (just for the self-provisioning with IVR, which I don't want)
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...