Does anyone have a list of the tags that can be used when creating universal line & device templates in CUCM 10?
The interface gives a few examples for first name, surname, userid, etc, but I beleive that there are other manual entries that you can type in yourself, but I can't find a list of them anywhere to reference.
For example for the alerting ID on a line I might want to use "line number - Firstname Lastname" or something like that, but the options for using the line number for example aren't available.
No, I raised a TAC case, and despite giving examples of documentation from PEC training that shows that you can use others, they stated that they didn't exist or work, despite being in the training and working.
I think it requires that the user has their primary extension already configured though, and so, if they do not have a controlled device assigned yet because they do not have a phone, then how does one assign a primary extension to the user in the first place?
Oh - you need to assign a device - which rather defeats the point does it not?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...