Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM 4.1 and IPCC 4 Upgrade to 7.x

Hi All,

I have a customer with a need to get their IPCC and CallManager environment back into maintenence.

Both the CUCM and IPCC are running on HP DL380G4 servers (HP branded - not MCS78xx)

What would the most cost effective method of upgrading them to ver. 7 of UCM and IPCC be without obtaining new hardware ?

There is no UCSS or ESW on either servers.

Thanks in advance.

Phil

1 ACCEPTED SOLUTION

Accepted Solutions

Re: CUCM 4.1 and IPCC 4 Upgrade to 7.x

Mostly likely the cheapest way would be to have them get their UCSS/ESW up to date as that would entitle them to free upgrades.  You could of course order the products new but it's going to cost an arm and a leg.  You'd have to check with your local Cisco Account Team to get their opinion though.

1 REPLY

Re: CUCM 4.1 and IPCC 4 Upgrade to 7.x

Mostly likely the cheapest way would be to have them get their UCSS/ESW up to date as that would entitle them to free upgrades.  You could of course order the products new but it's going to cost an arm and a leg.  You'd have to check with your local Cisco Account Team to get their opinion though.

172
Views
0
Helpful
1
Replies