I'm having problems loading a 7906G phone on to CUCM 4.2(1). I've downloaded and installed what I thought was the appropriate software based on the compatability matrix but I still don't have the option to add a 7906 within Call Manager. Any help would be appreciated.
Supported in Cisco Unified CallManager Versions 3.3(5)SR2, 4.1(3)SR3a, 4.2(1)SR1, and higher using Skinny Client Control Protocol (SCCP); supports both SCCP and Session Initiation Protocol (SIP) with Cisco Unified CallManager Version 5.0(2)
Thanks for the quick response. Unfortunately, 4.2(1)sr1b did not solve the problem. I'm going to try to upgrade to 4.2(3) and hope that fixes it. In case I'm missing something... this is what I'm running:
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.