Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM 6.0 System Health Monitoring

Is there any application to monitor the System/Server health for CUCM? such as CPU/MEM/HD?

We are using sitescope and i am not sure if I can put it on CUCM server.


Re: CUCM 6.0 System Health Monitoring

The Real-Time Monitoring Tool will be of particular interest to you.

The Cisco Unified Communications Manager Real-Time Monitoring Tool (RTMT), which runs as a client-side application, uses HTTPS and TCP to monitor system performance, device status, device discovery, and CTI applications for Cisco Unified Communications Manager. RTMT can connect directly to devices via HTTPS to troubleshoot system problems

Take a look at the following document:-

Another aspect of RTMT is the Trace Collection which is will also be useful to you.

Use Trace and Log Central, an option in the Cisco Unified Communications Manager Real-Time Monitoring Tool, to collect, view, and zip various service traces and/or other log files. With the Trace and Log Central option, you can collect SDL/SDI traces, Application Logs, System Logs (such as Event View Application, Security, and System logs), and crash dump files.

Taken from this CUCM Serviceability Guide:-

Also take a look at this information from the RTMT administration guide 6.1, particularly the section Configuring Trace and Log Central in RTMT.

Hope this helps


Pls rate helpful posts.