Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUCM 6.1(2) to 6.1(3) upgrade advice

Hi All

I want to upgrade my cucm 6.1(2) to 6.1(3) i have downloaded two very large files with .iso_part1of2 extensions. Do i need to remove the extension from the file and leave just .iso ?

i looked for support documentation but cant find anything useful other than telling me to create a ISO DVD for the uprade which failed when i tried (im using Nero)

any help appreciated

regards

Colin

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: CUCM 6.1(2) to 6.1(3) upgrade advice

Hi Colin,

At the end of the day, I believe the file should look like this;

UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

Upgrading From Cisco Unified Communications Manager Release 6.1(1x) or higher to Release 6.1(3) by Using the UCSInstall File

Because of its size, the UCSInstall iso file, UCOS_6.1.3.1000-16.sgn.iso, comprises two parts:

•UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2

•UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2

Procedure

Step 1From www.cisco.com, download the two UCSInstall files.

Step 2Execute one of the following commands to reunite the two parts of the file.

NoteThe 6.1.3.1000-16 build represents a non-bootable ISO that is only useful for upgrades. You cannot use it for new installations.

a.If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2 > UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

b.If you have a Windows system, cut and paste the following command from this document into the command prompt (cmd.exe) to combine the two parts:

COPY /B UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2+UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

Step 3Use an md5sum utility to verify that the MD5 sum of the final file is correct.

417c262e5706103c4e75a825e1d5d902 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

From these Release Notes;

http://www.cisco.com/web/software/282074295/24094/ciscocm-6-1-3.Readme.pdf

Hope this helps!

Rob

4 REPLIES
Hall of Fame Super Red

Re: CUCM 6.1(2) to 6.1(3) upgrade advice

Hi Colin,

At the end of the day, I believe the file should look like this;

UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

Upgrading From Cisco Unified Communications Manager Release 6.1(1x) or higher to Release 6.1(3) by Using the UCSInstall File

Because of its size, the UCSInstall iso file, UCOS_6.1.3.1000-16.sgn.iso, comprises two parts:

•UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2

•UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2

Procedure

Step 1From www.cisco.com, download the two UCSInstall files.

Step 2Execute one of the following commands to reunite the two parts of the file.

NoteThe 6.1.3.1000-16 build represents a non-bootable ISO that is only useful for upgrades. You cannot use it for new installations.

a.If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2 > UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

b.If you have a Windows system, cut and paste the following command from this document into the command prompt (cmd.exe) to combine the two parts:

COPY /B UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2+UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

Step 3Use an md5sum utility to verify that the MD5 sum of the final file is correct.

417c262e5706103c4e75a825e1d5d902 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

From these Release Notes;

http://www.cisco.com/web/software/282074295/24094/ciscocm-6-1-3.Readme.pdf

Hope this helps!

Rob

New Member

Re: CUCM 6.1(2) to 6.1(3) upgrade advice

Your a legend Rob

Thanks

Colin

Hall of Fame Super Red

Re: CUCM 6.1(2) to 6.1(3) upgrade advice

Hi Colin,

 

Hahaha......thanks buddy! Glad to be of some help here.

 

Cheers!

Rob

New Member

Re: CUCM 6.1(2) to 6.1(3) upgrade advice

Hi Colin,

be aware that CUCM 6.1(3) is not upgradable to CUCM 7.0 at this time.

Reg.

Johann

627
Views
0
Helpful
4
Replies
CreatePlease to create content