Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

CUCM 6.1 - How to set up System Speed Dials

Is there a way to build system speed dials in Call Manager 6.1?

I have a site that is wanting to have about 200 - 300 system speed dial numbers. Is this possible to do?

I could do this with translation patterns but did not know if there was something similar to setting up personal speed dials.

I do not want per phone basis, this needs to be something specific to this cluster.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: CUCM 6.1 - How to set up System Speed Dials

You can use either transaltion patterns (no canned way to bulk insert TPs unless you develop something in AXL), or use cti ports with dummy DNs (i.e. #XXX where XXX is the speed dial number) and set the call forward all to the desired destination, you can bulk insert cti ports.

HTH, please rate all posts!

Chris

2 REPLIES
Hall of Fame Super Silver

Re: CUCM 6.1 - How to set up System Speed Dials

You can use either transaltion patterns (no canned way to bulk insert TPs unless you develop something in AXL), or use cti ports with dummy DNs (i.e. #XXX where XXX is the speed dial number) and set the call forward all to the desired destination, you can bulk insert cti ports.

HTH, please rate all posts!

Chris

Silver

Re: CUCM 6.1 - How to set up System Speed Dials

This is what I was afraid of...

dang it...maybe in version 7

291
Views
0
Helpful
2
Replies