Yes, I know that VMware deployment of CUCM is not supported by Cisco but nevertheless...
I am trying to build a CUCM 126.96.36.1990-3 Pub for my home test lab. I am using VMware server 1.0.6 build on Windows 2003 SP2 server. When I am installing CUCM a strange thing happens that I have never seen before during multiple installations.
When the installation script reaches the Security Configuration step it goes through it for a while and after approximately 30 seconds it says "Errors" and then switches to another screen that says "Security Configuration Failed (1)". When after this you click OK the system returns you back to the Database Access Security Configuration screen and expects you (as far as I understand it) to change the Database Access password. I have tried different combinations for the password but all of them have returned the same error. I have spoken to a number of my collegues who are using different VMware build for CUCM 6.1 but nobody knows what the problem is and nobody has seen this before.
Any idea what it could be??? Any advice will be much appreciated! Thanks.
Use static IP addresses for the CallManager servers. If static IP addresses are not possible, then make sure there is a DHCP server installed that the CM can find. Try to change the IP address and you can be able to continue the installation process. bug: CSCsd29245
I did use static IP address for the CUCM. The only other thing - I used the NAT network configuration option on VMware and accordingly used the IP address given to me from the NAT network range. I'll try other options for the vmware network configuration. Thanks.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...