Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CUCM 6.1 license file removal

How do I remove an old phone license file from my system? I goofed when I was adding 20 new phone licenses and they reissued all of my original phones again. Now I have double the node licenses and almost double the phone license.

--Patrick

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: CUCM 6.1 license file removal

Hi Patrick,

Here are the details :)

file delete

The file delete command includes the parameters dir tftp and license. The file delete command deletes one or more files.

Command Syntax

file delete

dir tftp directory [detail]

license filename [detail]

Parameters

•dir tftp directory deletes the TFTP directory specified by directory. You cannot enter the wildcard character (*) in directory.

•license filename deletes the license file that is specified by license. You can enter the wildcard character (*) as filename to delete all the license files.

Options

•detail-Displays details

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_2/cucm-rel_note-612.html#wp412067

Hope this helps!

Rob

5 REPLIES
Hall of Fame Super Red

Re: CUCM 6.1 license file removal

Hi Patrick,

Here are the details :)

file delete

The file delete command includes the parameters dir tftp and license. The file delete command deletes one or more files.

Command Syntax

file delete

dir tftp directory [detail]

license filename [detail]

Parameters

•dir tftp directory deletes the TFTP directory specified by directory. You cannot enter the wildcard character (*) in directory.

•license filename deletes the license file that is specified by license. You can enter the wildcard character (*) as filename to delete all the license files.

Options

•detail-Displays details

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_2/cucm-rel_note-612.html#wp412067

Hope this helps!

Rob

Community Member

Re: CUCM 6.1 license file removal

Thanks Rob,

That did the trick.

--Patrick

Community Member

Re: CUCM 6.1 license file removal

Is there a way to get CCM to use the original node license that is installed during installation? Using your steps I was able to delete the licenses that I needed to, but now it's saying that I don't have a node license when there was one automatically there when I installed the server.

Community Member

Re: CUCM 6.1 license file removal

Hi

I also have the same problem with you. I had deleted the license following the steps in the discussion. But the original node license file is gone too.

So anyone have got a way to get the original no license back.

Please!!! I need it urgently!!!

Cisco Employee

Re: CUCM 6.1 license file removal

you cannot get it back, once you install a permanent licence the one that came with the server is gone

you need another permanent license

HTH


java


if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
595
Views
8
Helpful
5
Replies
CreatePlease to create content