CUCM 6.1 SCCP NTP - Pub linked to NTP, but will it update for DST changes?
I have an NTP source added in OS Admin to reference one of our Stratum level 2 devices (a Domain Controller that automatically updates for BST changes etc)
Quick question - although my NTP source for the SCCP phones we use is setup, my "Date/Time group" in the Admin GUI is setup as "GMT Standard/Daylight Time GMT"
Does this infer that CallManager will remain "dumb" to any daylight savinggs time dates, and will ONLY pull correct time from the NTP source with which the Publisher is linked?
Im a little worried that the recent March 2009 DST/BST debacle :o) where IP Phones didn't adjust might impact us again, even though I have a valid NTP source set...?
Im running CUCM 6.1(2) and currently the times are correct after setting the NTP source, restarting my Pub and Subs, then resetting all the devices in my Time/Date Group. Im not certain this will remain the case when BST ends later this year :o)
Re: CUCM 6.1 SCCP NTP - Pub linked to NTP, but will it update fo
Cheers Jamesha. I was hoping that i wouldn't have to update the NTP source and that CUCM would do all the changes :o) I guess i just hope that the recent DST issues were US related only and that GMT/BST timezone settings will work fine.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4