Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM 6.1 TIME ISSUES, LOOKING FOR PUBLIC NTP

the time on the phones are slipping each day and have to keep resetting... Im looking for some guidance in how to configure a Public NTP on the CUCM 6.x and UC.  Any help would greatly be appreciated.

source of public NTP?

Assistance in synching it?

Thanks in advance..

Everyone's tags (7)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: CUCM 6.1 TIME ISSUES, LOOKING FOR PUBLIC NTP

Public NTP is reliable, easy to use and perfectly suited for the average enterprise or home user. Moreover it's free.

I use it without any issue for all my clients since 20 years.

http://support.ntp.org/bin/view/Servers/WebHome

4 REPLIES

Re: CUCM 6.1 TIME ISSUES, LOOKING FOR PUBLIC NTP

Hi, do you have IOS/Unix based NTP server inside your network?

Normally a well planned network should have a NTP server inside the network to source all NTP packets from inside the network and that NTP server is synched with lower stratum NTP source (this might be the public NTP or synced with another NTP server or even manually set).

I never heard someone has synched the CUCM to public NTP, may be it's not a good practice.

HTH.

Hall of Fame Super Gold

Re: CUCM 6.1 TIME ISSUES, LOOKING FOR PUBLIC NTP

Public NTP is reliable, easy to use and perfectly suited for the average enterprise or home user. Moreover it's free.

I use it without any issue for all my clients since 20 years.

http://support.ntp.org/bin/view/Servers/WebHome

Re: CUCM 6.1 TIME ISSUES, LOOKING FOR PUBLIC NTP

Thanks for the info, +5 for your input. I didn't have idea on it before.

It will help me to think about using it from further deployment.

New Member

Re: CUCM 6.1 TIME ISSUES, LOOKING FOR PUBLIC NTP

Thnx for the link to the NTP? configured it to synch with 132.246.168.148 ....

command for reference

utils ntp config 132.246.168.148

utils ntp restart

utils ntp status..

admin:utils ntp status
ntpd (pid 7954) is running...

     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
127.127.1.0     127.127.1.0     10 l   49   64    1    0.000    0.000   0.008
*132.246.168.148 132.246.168.2    2 u   31   64    1  106.997   -3.685   0.225


synchronised to NTP server (132.246.168.148) at stratum 3
   time correct to within 18 ms
   polling server every 16 s

Current time in UTC is : Wed Jul 21 22:57:26 UTC 2010
Current time in America/Denver is : Wed Jul 21 16:57:26 MDT 2010

1614
Views
5
Helpful
4
Replies